A person
familiar with splicing will turn in a splice almost as quickly as the
ordinary man can tie a secure knot, and in many cases, where the rope
must pass through sheaves or blocks, a splice is absolutely necessary
to fasten two ropes or two parts of a parted rope together. The
simplest of all splices is known as the "Short Splice" (Fig. 106).
This is made as follows: Untwist the ends of the rope for a few inches
and seize with twine to prevent further unwinding, as shown at _A_,
_A_; also seize the end of each strand to prevent unravelling and
grease or wax the strands until smooth and even. Now place the
two ends of the ropes together as shown at _B_, _B_. Then with a
marline-spike, or a pointed stick, work open the strand 1 _c_, and
through this pass the strand _A_ of the other rope; then open strand 2
and pass the next strand of the other rope through it and then the
same way with the third strand. Next open up the strands of the other
rope, below the seizing, and pass the strands of the first rope
through as before, 3 _A_, _B_.
Pages:
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53